Abracadabra – Harry & Hermione’s Magic Wands

Hermione and Harry never go anywhere without their magic wands. 

Logo/Sign at Ollivander’s Wand Store, Universal Studios

Every Hogwarts’ wizard goes to Ollivander’s to choose his or her magic wand. 

Magic Wands at Ollivander’s Wand Store

While doing research, I was surprised to see that many of the wands in the Harry Potter series were rather lackluster.  I expected wizards to have exquisite, highly personalized wands to express their personalities as well as their power. 

Wooden Chopsticks

For this project, we will transform wooden chopsticks into magic wands for Hermione Grainger and Harry Potter.  Use these techniques to create a wand for any character and add whatever embellishments feel right to you. 

How to Make Hermione’s Magic Wand:

Inspiration

Hermione’s wand has a fairly simple design, consisting of English ivy wrapped around a monotone magic wand. 

Supplies

Supplies:
Wooden Chopstick (9” long x 3/8” thick)
Acrylic Paint: yellow ochre
Bottle fabric paint: glow-in-the-dark white
Paintbrushes
Clear Spray Paint: Matte Finish
Optional 1) Faceted rhinestone & Acrylic Paint: metallic peridot.  See “Advanced Painting” below.

Painting Chopstick

Step 1 – If the chopsticks are lacquer-coated, you may need to prime the surface first, and then apply two coats of acrylic paint.  Puncture a hole in a box to hold the wand upright for drying, but don’t forget to paint the tip later.  To prevent fingerprints and scratches, handle with a tissue. 

Painting Vines & Leaves

Step 2 – Starting at the top, use three-dimensional paint to create an ivy vine wrapping around the wand.  Add an interesting twist by using glow in the dark white paint, but if you prefer, you can use plain white.  If you want to be true to Hermione’s original wand design, wait until the 3D paint dries, and then paint the vines with yellow ochre to match the rest of the wand. 

Hermione’s Finished Wand

To seal the paints, spray the wand with clear spray paint.  At this point, the wand is complete.  If you have been following this blog for a while, you know there is usually an enhanced version, which is shown below in the “Advanced Painting” section. 

How to Make Harry’s Magic Wand:

Inspiration

Harry’s wand has a textured, two-tone design.  Rough “tree bark” at the top serves as a handgrip, and the rest is smooth wood. 

Supplies

Supplies:
Wooden Chopstick (9” long x 3/8” thick)
Acrylic Paint – licorice black, coffee bean brown
1) Bottle fabric paint – brown
Paintbrushes
Clear Spray Paint: Matte Finish
Optional – Glue gun & 1) Faceted rhinestone. See “Advanced Painting” below.

Creating Texture

Step 1 – Using three-dimensional paint, draw long lines at top to create the basic texture as shown above. 

Adding More Texture

Step 2 – Fill in with more texture, to create a rough tree bark appearance, including pointed edges across the top of the wand.  Allow paint to dry overnight. 

Painting Black

Step 3 – Paint the entire wand with black acrylic.

Dry Brushing Brown

Step 4 – Dry brush the rough bark with brown acrylic paint, allowing the black recessed areas to show through, as they do with real bark.  Seal the paints with clear spray paint. 

Harry & Hermione’s Finished Wands

This photo shows the two completed wands side by side.  I wanted to take this project to the next level by creating more texture on Harry’s wand and more visual interest for Hermione’s. 

Advanced Painting:

Hermione’s Wand – Defining the Leaves

Step 1 – Make the leaves more prominent by applying a thicker coat of the same three-dimensional glow in the dark paint on each individual leaf. 

Close-Up Vines & Rhinestone

Step 2 – Create a glowing cap on the end of the wand and place a rhinestone in the center as shown.  In case you didn’t know, fabric paint can be used in place of glue. 

Glowing Wand

Step 3 – After being exposed to light, the vines, and leaves glow in the dark.  You can test the glow by holding the wand under a bright light for several seconds and then switch off the lamp.  Adjust the paint as needed. 

Accent Painting the Leaves

Step 4 – Something still needed to be added, but I didn’t know what it was.  Finally, I decided to apply a soft pastel green to the leaves, providing color as well as a subtle shimmer.  Seal paints with clear spray paint.  By day or night, this wand has stylish and surprisingly powerful. 

Harry’s Wand – Creating Thicker Tree Bark

Step 1 – Using a glue gun, add long lines for more texture upon the handgrip. 

Roughening the Texture

Step 2 – Use brown three-dimensional paint to roughen up the smooth lines of glue, to resemble tree bark more closely. 

Painting Black

Step 3 – Paint the entire wand with black acrylic.

Dry Brushing Brown

Step 4 – Dry brush only the rough bark handle with brown acrylic paint, allowing the black recessed areas to show through, as they do with real bark.  Use glow in the dark fabric paint to attach a rhinestone to the end of the wand as shown above.  Seal paints with clear spray paint. 

Harry’s Finished Wand

The thickened “tree bark” looks better, and the sleek black wand is the perfect choice for a powerful wizard. 

Harry & Hermione’s Finished Wands

These two wands work well together, just like Harry and Hermione. 

Close-Up – Both Finished Wands

I hope you have found a few inspirational ideas to create your own wands.  Do you have a favorite wizard, or a favorite magical literary character?  What kind of magic wand do you think that character would choose?  Please let me know in the comments section.  Enjoy the creative process, and let your ideas run wild. 

For more Harry Potter crafts, please check out this post: “Harry Potter’s Magical Creatures.”

Thanks for Reading & Happy Crafting!

Harry Potter’s Magical Creatures

Diagon Alley
During frustrating travel restrictions, wouldn’t it be nice to wave a magic wand to restore order once again to our lives.  I suppose the next best thing is delving into a magical book or watching a movie about everyone’s favorite teen wizard, Harry Potter.

Harry Potter Owl & Griffin
While I appreciate all the characters created by J.K. Rowling, I must admit my favorites are the mysterious, magical creatures that inhabit that fantasy world.  Whether real or imagined, each is endowed with exceptional powers and abilities – some for good and others not so much.

Harry Potter Goblin & Dragon
Don’t you just love goblins for balancing the books and dragons to keep it interesting?

Fire Breathing Dragon
Fire-breathing dragons are awesome, but perhaps we need to find something a little less flammable? lol

Harry Potter Monster Book
Every Harry Potter fan dreams of living in his magical world. You have read the books and seen the movies, but to experience it in the real world, you’ll need to make the trip to Universal Studio’s Wizarding World of Harry Potter. If travel isn’t on your agenda, perhaps you could bring a piece of Harry’s world into your own.

Harry Potter Monster Book
You can’t be a wizard without a few enchanted books. Who could forget the ferocious monster book? Ever wondered if you could make one?

How to Make a Monster Book Fit for a Wizard:

Raw Wood Book Box
Unfinished Wood Book Box
The moon and the stars must have aligned to make your wish come true with the discovery of this wooden book box, available through Michaels for $6.49. It’s the perfect size and thickness, and offers a strong foundation for building a monster book. As a bonus, there’s a secret compartment inside for storing your favorite spells (recipes), magic charms (office supplies), or wizardly collectibles.

Supplies:
Wooden Book Box (9.75″ x 7.5″ x 2.88″)
Black Paint – brush on Acrylic or spray paint
Sharpie Metallic gold marker – medium point
Vampire Teeth
Faux fur
4) Packing peanuts
4) Glass marbles – orange
1) Bottle fabric paint – black
1) Bottle fabric paint – white
1) Leather or vinyl belt
Glue gun
Scissors
Paintbrush

Book Box Painted Black
Book Painted Black
Paint the box black, inside and out. This dark color will make a great contrasting background for the gold paint applied in the next step.

Gilded Pages
Gilded Pages
To create the appearance of gilded pages, draw horizontal lines along all three sides of the book, using a Sharpie metallic gold pen. Don’t worry about crooked lines. Pages in old books become crinkled and curled. Imperfect lines will provide an aged look.

Toothy Expression
Attach Teeth
The next step is attaching teeth. Center the mouth as shown. The large fangs are from Fire Mountain Gems, and the smaller teeth are actually clear quartz crystal chips, painted to match. To simplify this step, purchase vampire teeth at a Halloween store or Amazon.

Hair Club for Monsters
Fur Cover
Faux fur from JoAnn Arts & Crafts is the perfect color and texture for this monster. Cut the piece large enough to allow a hem on all four sides. Be sure the fur will not interfere with the operation of the hinges. Please note: the raw edges of fur shed like crazy. Once they are hemmed and attached to the book the shedding stops. (Yeah!)

Faux Fur
Trim & Hem Fur
The sides could be hand sewn, but these hems were made with a glue gun.

Shaped & Glued Packing Peanuts
Packing Peanuts as Eye Sockets
I decided this monster would have four eyes. To make the eye sockets, use four packing peanuts. Each peanut is pinched in half and glued to hold its shape. Glue the four together end to end as shown.

Painted Black
Painted Packing Peanuts
Paint the foam with black fabric paint. Use a toothpick to keep the paint off your fingers.

Orange Glass Eyes
Marble Eyes
I found four orange glass marbles with red streaks resembling bloodshot eyes. Each was glued into the sockets, and outlined with white fabric paint. A white dot was added to each marble to give it that creepy glint in the eye appearance.

Final Assembly
Attach Eyes & Fur
Attach the eyes to the fur, and then secure the fur on top of the box.

Accessorize
Finished Monster Book
Last step: Wrap an old leather belt around the book to keep your monster under control.

For diehard Harry Potter fans with model building and wiring skills, there is one more step that would take this monster book to the ultimate level: mechanization!  Hide a motor inside the box to operate remote controlled wheels and hinges for the jaws.  Unleash the beast!  lol

Congratulations!  You’re now the proud owner of your very own Monster Book.  Be sure to keep it on a short leash because we all know how much it loves to shred – shoes, feet, paper – anything within reach.  For decades, kids have been telling their teachers, “The dog ate my homework!”  With a monster book as a pet, this excuse might be believable!

Do you have a favorite Harry Potter creature?  Please share your thoughts in the comments section.  Until next time…

For more Harry Potter crafts, please check out this post: “Abracadabra – Hermione & Harry’s Magic Wands.” 

Thanks for Reading & Happy Crafting!

What’s New in the Studio?


It’s that time again. You’re in a creative mood but aren’t sure where to start. The endless possibilities can be overwhelming. Sometimes it’s easier to look at a wide assortment of completed projects, to see if anything piques your interest. Below are photos of several projects for your review. When you find one you like, click on the link above the photo for a complete list of easy to follow instructions. Enjoy!

Harry Potter Monster Book
Harry Potter Monster Book

Bejeweled Box
Jeweled Box

Suncatchers
Mirror with Applied Suncatchers

For additional photos and instructional links, please click here to visit a new page on our website called “How to Projects.” From time to time, new projects will be added, so please stop by to see what’s new in the studio.

Happy Crafting!

Wizarding World of Harry Potter – Monster Book

Harry Potter Monster Book
Every Harry Potter fan dreams of living in his magical world. You have read the books and seen the movies, but to experience it in the real world, you’ll need to make the trip to Universal Studio’s Wizarding World of Harry Potter. If travel isn’t on your agenda, perhaps you could bring a piece of Harry’s world into your own. You can’t be a wizard without a few enchanted books. Who could forget the ferocious monster book? Ever wondered if you could make one?

Unfinished Wood Book Box
The moon and the stars must have aligned to make your wish come true with the discovery of this wooden book box, available through Michaels for $5.99. It’s the perfect size and thickness, and offers a strong foundation for building a monster book. As a bonus, there’s a secret compartment inside for storing your favorite spells (recipes), magic charms (office supplies), or wizardly collectibles.

How to Make a Monster Book Fit for a Wizard:

Supplies:
Wooden Book Box (9.75″ x 7.5″ x 2.88″)
Black Paint – brush on Acrylic or spray paint
Sharpie Metallic gold marker – medium point
Vampire Teeth
Faux fur
4) Packing peanuts
4) Glass marbles – orange
1) Bottle fabric paint – black
1) Bottle fabric paint – white
1) Leather or vinyl belt
Glue gun
Scissors
Paintbrush

Book Painted Black
Paint the box black, inside and out. This dark color will make a great contrasting background for the gold paint applied in the next step.

Gilded Pages
To create the appearance of gilded pages, draw horizontal lines along all three sides of the book, using a Sharpie metallic gold pen. Don’t worry about crooked lines. Pages in old books become crinkled and curled. Imperfect lines will provide an aged look.

Attach Teeth
The next step is attaching teeth. Center the mouth as shown. The large fangs are from Fire Mountain Gems, and the smaller teeth are actually clear quartz crystal chips, painted to match. To simplify this step, purchase vampire teeth at a Halloween store or Amazon.

Fur Cover
Faux fur from JoAnn Arts & Crafts is the perfect color and texture for this monster. Cut the piece large enough to allow a hem on all four sides. Be sure the fur will not interfere with the operation of the hinges. Please note: the raw edges of fur shed like crazy. Once they are hemmed and attached to the book the shedding stops. (Yeah!)

Trim & Hem Fur
The sides could be hand sewn, but these hems were made with a glue gun.

Packing Peanuts as Eye Sockets
I decided this monster would have four eyes. To make the eye sockets, use four packing peanuts. Each peanut is pinched in half and glued to hold its shape. Glue the four together end to end as shown.

Painted Packing Peanuts
Paint the foam with black fabric paint. Use a toothpick to keep the paint off your fingers.

Marble Eyes
I found four orange glass marbles with red streaks resembling bloodshot eyes. Each was glued into the sockets, and outlined with white fabric paint. A white dot was added to each marble to give it that creepy glint in the eye appearance.

Attach Eyes & Fur
Attach the eyes to the fur, and then secure the fur on top of the box.

Finished Monster Book
Last step: Wrap an old leather belt around the book to keep your monster under control.

Congratulations! You’re now the proud parent of your very own Monster Book. Be sure to keep it on a short leash because we all know how much it loves to shred – shoes, feet, paper – anything within reach. For decades, kids have been telling their teachers, “The dog ate my homework!” With a monster book as a pet, this excuse might actually be believed!

Do you have a favorite Harry Potter creature? Please share your thoughts in the comments section. Until next time…

Happy Crafting!